| T O P I C R E V I E W |
| reptilekeeper1992 |
Posted - 04/10/2009 : 23:18:36
i just looked at your DIY for building the two foot vivarium
for the glass/perspex doors what size of each panel did you get, i am trying to get two pieces of glass that meet in the middle so that the vivarium lock can go in the middle.
what size panels would you recommend for 2 ft tanks. if i want it in the middle do i need around 1ft long each panel??? |
| 7 L A T E S T R E P L I E S (Newest First) |
| reptilekeeper1992 |
Posted - 05/10/2009 : 22:59:12
so each piece of glass 206mm by 280mm
thanks, i knew there had to be overlap but wasnt sure about how much overlap there should be
thanks |
| Gingerpony |
Posted - 05/10/2009 : 21:22:03
quote:
Originally posted by spor
... didn't want to answer as it was for BE. felt like i was opening someone else's mail.LOL
lmao i figured it was only BE's mail............. |
| hodgie |
Posted - 05/10/2009 : 19:37:28
If you`ve used my guide then its
206mm deep by 280mm wide |
| spor |
Posted - 05/10/2009 : 19:31:06
yeah as above . with out the overlap you cant lock when i ordered my glass i gave measurements allowing for 2inc overlap. don't forget as well that you need an extra centimeter in glass height to allow for the groves in slide rail. sorry seen post last night but didn't want to answer as it was for BE. felt like i was opening someone else's mail.LOL |
| Remmy |
Posted - 05/10/2009 : 17:30:29
You need an overlap of 1 1/2 - 2 inches for the lock |
| Blackecho |
Posted - 05/10/2009 : 12:10:39
Sorry, it wasn't me, I put it in the DIY section, but it was originally written by Hodgie.
as GP says, you should have some amount of overlap though. |
| Gingerpony |
Posted - 05/10/2009 : 11:03:01
don't you need an overlap in the middle for a conventional viv lock? |
