| T O P I C R E V I E W |
| jimmer7 |
Posted - 24/01/2013 : 19:30:29
My viv unit is being built , and being delivered on the 18th feb,
There is two 3ftx2ftx2ft vivs on the bottom, then open cuby holes above them, then another two vivs on top of that.
My question is should I place all the ceramic heaters to the inside or out side.
___________________________
| ? ? | ? ? |
|____________|_____________|
|? ? | ? ? |
|____________|____________|
Cheers |
| 5 L A T E S T R E P L I E S (Newest First) |
| BlueDragon |
Posted - 25/01/2013 : 09:06:34
Can see it working either way, as long as the set up is mirrored in opposite vivs so that the envoroment is the same in all of them.
Does that make sense?
Either the heatbulbs next to each other or opposite on the outside so that they don't have a negitive effect on the viv next door. |
| jbarlow91 |
Posted - 25/01/2013 : 07:19:34
Could do that aswell lol then the bulbs wouldn't have to work as hard I bet so they should last longer |
| jimmer7 |
Posted - 24/01/2013 : 23:50:08
Ok cheers, I was going to put heaters on the inside then all the cold end should be on the outer.
|
| jbarlow91 |
Posted - 24/01/2013 : 20:41:04
I would have the bulbs on the outside so the cool ends are next to each other incase the temps aint cool enough |
| Fezza |
Posted - 24/01/2013 : 20:28:30
I don't think it'd make that much difference tbh, so long as they're not warm side next to cold side it should be good |
