| Author |
 Topic  |
|
|
cockings
Snake Mite
United Kingdom
47 Posts |
 Posted - 01/11/2011 : 19:36:45
|
Is Heat cable enough to heat racking systems the warm end anyway.
If so what brand or cable should i use
Thanks Jas |
1x Pastel Royal CB10
1x Spider CB11
|
|
|
Kelfezond
The bearded one
United Kingdom
4803 Posts |
Posted - 01/11/2011 : 19:38:36
|
| Yes it is I use heat cable, I cannot remember the brand name sorry |
\v/ Click me for Kelfezond Reptiles Facebook Page! \v/
  |
 |
|
|
GMac
Grumpy scots admin
United Kingdom
1152 Posts |
Posted - 01/11/2011 : 19:39:14
|
| yes Heat cable is fine for heating a rack, as for brand they are pretty much all similar. Surrey pet supplies has been the cheapest for cable that I have found so far. |
 
Royals, Corns, Boa, Kings, Hoggy, Ratsnakes
|
|
|
|
cockings
Snake Mite
United Kingdom
47 Posts |
Posted - 01/11/2011 : 19:43:11
|
Will i need to use one strip across the bottom our two to make a great enough hpt spot.. The depth of the plastic trays in this rack is around 38cm.
Hope that makes sense trying to work out much cable i need to use in each shelf to create the hope spot
Thanks Jas |
1x Pastel Royal CB10
1x Spider CB11
|
Edited by - cockings on 01/11/2011 20:05:30 |
|
|
|
boomslang
Old Royal - I Post too much!
United Kingdom
2025 Posts |
Posted - 01/11/2011 : 19:51:41
|
Look into how much you need,as they measure the plug lead with the cable ie..2m heat cable say,which 1m is just lead.So you get 1m of heat cable rather then 2m listed.
If that makes sense hehe. |
1.0.0 pinstripe Royal Python
1.0.0 Bumblebee Royal Python
1.0.0 Normal corn
1.0.0 Extreme red Hognose
0.1.0 Extreme red tiger Hognose
1.1.0 yemen chameleons
1.0.0 Piebald yemen
1.0.0 Tamatave panther
1.0.0 Quadricornis
 |
|
|
|
Kelfezond
The bearded one
United Kingdom
4803 Posts |
Posted - 01/11/2011 : 21:01:58
|
firstly I routed the wood like this.
Then foiled it with heat reflective tape like this.
I bought I think 16m of it and it did 5 shelves like that with excess remaining. |
\v/ Click me for Kelfezond Reptiles Facebook Page! \v/
|
Edited by - Kelfezond on 01/11/2011 21:02:27 |
|
|
|
cockings
Snake Mite
United Kingdom
47 Posts |
Posted - 01/11/2011 : 21:23:47
|
| Where did you buy it from i have only seen zoo med, and not lookedin any DIY type stores |
1x Pastel Royal CB10
1x Spider CB11
|
|
|
|
Kelfezond
The bearded one
United Kingdom
4803 Posts |
|
|
cockings
Snake Mite
United Kingdom
47 Posts |
Posted - 02/11/2011 : 05:55:12
|
| thanks that is great as its the one i have been looking at thanks mate |
1x Pastel Royal CB10
1x Spider CB11
|
|
|
|
ShadEO9
Yearling
United Kingdom
126 Posts |
Posted - 12/06/2014 : 01:26:37
|
Sorry to resurrect such an old post. I currently heat my snake racks with heat mats, but this is really inconvenient for a whole host of obvious reasons. I've been gooling around the web on heat cable and sure enough found the same link from the same site that Kelfezond recommends. My question is, could someone post pics of how the fix this to the snake rack itself? As the older pics posted are broken and don't seem to work.
Thanks in advance!
|
 |
|
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 13/06/2014 : 23:29:19
|
| You just use a router to cut a groove into each shelf the full length of the shelf and run the cable in the groove so the Rubs/tubs etc slide in and out smoothly. You can also buy a foil backing to help reflect all the heat upward. Probably better to hire a router than to buy one, try HSS or a local tool hire company. |
|
|
|
|
ShadEO9
Yearling
United Kingdom
126 Posts |
Posted - 14/06/2014 : 21:25:11
|
Thanks Lotabob, getting hold of a router might prove a little tricky for me for a number of reasons. First being the rack came ready built and i don't fancy my DIY skills lol. Would something like this possibly work? > http://southerncaliforniakingsnakes.weebly.com/uploads/7/8/8/1/7881947/8981437_orig.jpg?0
The rack i have is very smart looking with a semi-closed back with room for wires. heat cable does seem to be the easiest option for me, unless anybody else has other ideas?
*EDIT*
If the heat cable won't be very effective at the back of the rack im going to make shelf runners as this seems like the better option. |
|
Edited by - ShadEO9 on 14/06/2014 22:08:44 |
|
|
| |
Topic |
|
Heat Cable
