Author |
Topic |
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 02/06/2013 : 17:17:55
|
So I have 2 of these arriving next week so I've been knocking together a few tubs for them. I'm testing the water so to speak with humidity, one pot has twice the amount of moisture in, test it for a few days empty see which one performs better.
If anyone has any tips then do leave a comment, I don't want these to die because I'm doing something wrong. |
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 02/06/2013 : 17:23:51
|
look's good but i would put more vent hole's in the lid's to give more air flow. are you getting juvi's? |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 02/06/2013 : 17:28:16
|
this is the setup i had a 3-4" avic avic in it's still in there an doing great with the person that now own's it
|
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 02/06/2013 : 17:30:41
|
2cm slings/juveniles.
That's the lid, would you still think it needs more? |
|
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 02/06/2013 : 17:36:34
|
would probably be enough but a ring of them in the middle of the lid wouldn't hurt.
the hole's look a bit big though for 2cm juvi's id be a bit worried they could get out |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 02/06/2013 : 18:05:25
|
They are a bit big, I was aiming for 5mm but seem to have got 7mm, I got carried away, I'm going to see how big the T's are when they arrive, if the holes are a bit too big I have tile spacers that I will quick setting glue over the holes, make little prison bars. Won't look very pretty but if it keeps them in the tub it's worth it. Give them something to climb on too. |
|
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 02/06/2013 : 18:14:57
|
sound's like a good plan i tend to make the hole's for small stuff with a compass point an a lighter, will get a cheap soldering iron as some point to make it really easy |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 02/06/2013 : 18:38:14
|
I used a pointy pair of scissors and marked at 5mm. Fingers crossed they are bigger than advertised and they will be fine and just serve as an escape route for unbeaten roaches which sounds unlikely with the reported feeding responses from these guys. |
|
|
|
carlb1981
Fully Grown Royal
United Kingdom
1527 Posts |
Posted - 02/06/2013 : 19:38:24
|
My versi pounces on its food straight away where as the leata takes its time and just waits for the easiest opportunity lol |
3.3.0 Royals,Yellow Belly -Marty,Fire YB-Fred,Mojave-Mo,Butter Pinstripe-Betty,Pewter-Newt,Normal-Molly 0.1.0 Snow Cornsnake- Lumi 1.1.0 Hypo Sonoran Dwarf Boa-Bart and Maggie 0.1.0 Albino Pine Snake-Ruby 1.0.0 Bredli Python-Brian 1.0.0 Western Hognose-Hal 1.0.0 Kayuadi Retic-Kaa 0.1.0 Honduran Milksnake-Jubbly 1.1.0 Salmon Boas-Hershey and Sam 0.2.0 Leopard Geckos-Spot and Chocolate 1.4.0 Dune Geckos 0.1.0 Beardie-Cookie 0.3.7 Tarantulas 0.0.1 Pandinus Imperator/emperor scorpion
|
Edited by - carlb1981 on 02/06/2013 19:38:47 |
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 02/06/2013 : 20:33:58
|
Sounds good, I can't wait to get these little beasts. |
|
|
|
|
Topic |
|