| Author |
 Topic  |
|
|
LucyB
Hatchling
50 Posts |
 Posted - 14/06/2011 : 13:12:24
|
I have just put a hole in the rub about 1/2 - 1 inch up the wall on the warm side to measure the heatmat temperature with the stat probe, but wasn't sure where best to position the thermometer probe? I was thinking slap bang in the middle between the warm and cold ends of the rub to get an overall temp half way up the wall?
Where does it need to be? |
|
|
Kelfezond
The bearded one
United Kingdom
4803 Posts |
Posted - 14/06/2011 : 13:28:30
|
| I put my thermometer directly under the heat lamp in the hottest part the snake can get to, always good to know what temp the hottest part is incase you overheat it. |
\v/ Click me for Kelfezond Reptiles Facebook Page! \v/
  |
 |
|
|
Margwar
Yearling
United Kingdom
211 Posts |
Posted - 14/06/2011 : 16:12:32
|
| Ours are cable tied to the stat probe. |
|
|
|
|
jhk2005
Yearling
United Kingdom
166 Posts |
Posted - 14/06/2011 : 17:16:02
|
| it's hard to describe without pix but basically I position mine through a hole in one of the narrow ends of the rubs and sticky-tape it to the floor about 1/3rd of the length. This works fine for me when using heatmats and means its accurate no matter what type of bedding that particular snake is on. |
1.6.0 Normal Royals - Will, Grace, Lolly, Patty, Maddie, Mystique, Victoria
1.1.0 Pastel Royals - Becks, Sophie
0.1.0 Spider Royal - Charlotte
0.1.0 Mojave Royal - Mo
1.1.0 Yellowbelly Royals - Pinky, Perky
1.0.0 Pinstripe Royal - Pip
1.0.0 Bumblebee Royal - Buzz
1.0.0 Vanilla Royal - Vinnie
1.0.0 Lesser Royal - Leo
1.0.0 Cinnamon Royal - Sam
1.0.0 Burmese Python - Kane
0.1.0 Albino Burmese Python - Amber
1.0.0 Redfoot Tortoise - Chucky |
|
|
|
Royalbob
Royal Python Moderator
United Kingdom
1115 Posts |
Posted - 14/06/2011 : 23:53:57
|
With mine I have the rub directly on the heat mat. I then place the
stat and temp probe directly on heat mat and cover them. Mat is then heated to 91F
which gives me 89- 90F on the surface of the rub. The prob with stat
and temp probes in the rub is that it's very easy for snake to lie on
them and get false readings. |
1.0 Enchi butter
1.0 Enchi X Pastel
1.0 Fire het clown
1.0 Bumblebee
1.0 pinstripe
0.1 Enchi Fire
0.1 Pastel calico
0.1 Yellow belly Pinstripe
0.1 Lemon pastel poss het clown
0.1 Het clown
0.1 Yellow belly
0.1 Green Mojave
0.1 HC Albino
0.2 Normals
|
|
|
| |
Topic |
|
Where to position digital thermometer probe?
