| Author |
 Topic  |
|
|
Jacko23
Snake Mite
United Kingdom
27 Posts |
 Posted - 20/07/2011 : 17:09:34
|
As the title, how, where, what, when!?
What temps do you achieve and how do you do so? |
|
|
anatess
Sub Adult
USA
669 Posts |
Posted - 20/07/2011 : 23:30:37
|
quote:
Originally posted by Jacko23
As the title, how, where, what, when!?
What temps do you achieve and how do you do so?
Flexwatt heat tape placed underneath the RUB plugged into a pulse proportional thermostat.
I set the stat at 93F which gives me a good 90-92F on the RUB floor under the hot-side hide.
|
        
Snake owner since Oct 2008, so yeah, I'm no expert.
0.1.0 pastel royal
1.0.0 spider royal
0.1.0 albino royal
1.0.0 bumblebee royal
1.0.0 yellowbelly royal
0.0.1 wild-type royal
1.0.0 normal western hognose |
 |
|
|
n/a
deleted
7384 Posts |
Posted - 20/07/2011 : 23:41:33
|
| Or you can use a heat mat (statted of course; you can get mat stats but pp stats are more accurate and can be used for a ceramic heater in future) for just one rub, underneath a half to one third of the rub to create a warm end. And the room temp has to be pretty high - I think something around 26c, as the rub doesn't retain heat as well as a viv - that's why people have rep rooms that they can heat to a good ambient temp. A lot of people will put a smaller rub inside the snake's future viv, on the statted mat of course, and then the viv will hold the heat better. I'm doing this in my smallest corn's viv at present; the lid of the rub is now off and she climbs in and out at will, but generally stays in the rub. |
|
|
|
|
anatess
Sub Adult
USA
669 Posts |
Posted - 21/07/2011 : 00:24:54
|
quote:
Originally posted by BurnedAtTheStake
Or you can use a heat mat (statted of course; you can get mat stats but pp stats are more accurate and can be used for a ceramic heater in future) for just one rub, underneath a half to one third of the rub to create a warm end. And the room temp has to be pretty high - I think something around 26c, as the rub doesn't retain heat as well as a viv - that's why people have rep rooms that they can heat to a good ambient temp. A lot of people will put a smaller rub inside the snake's future viv, on the statted mat of course, and then the viv will hold the heat better. I'm doing this in my smallest corn's viv at present; the lid of the rub is now off and she climbs in and out at will, but generally stays in the rub.
BATS! You're a genius! I don't know why I didn't think of that before! I have this problem-child that is outgrowing her 17L but can't seem to get her to move to a 64L without her going crazy... You just gave me an idea to put that 17L inside the 64L.
Brilliant! |
Snake owner since Oct 2008, so yeah, I'm no expert.
0.1.0 pastel royal
1.0.0 spider royal
0.1.0 albino royal
1.0.0 bumblebee royal
1.0.0 yellowbelly royal
0.0.1 wild-type royal
1.0.0 normal western hognose |
|
|
|
n/a
deleted
7384 Posts |
Posted - 21/07/2011 : 00:48:27
|
Aww, Anatess, I'm blushing lol!
Glad to have helped but I've read about this idea a few times on this forum so can't really take credit for it.
It does seem to work - my little girl is now greedy and cheeky and thoroughly settled. Good luck with your girl. |
|
Edited by - n/a on 21/07/2011 11:24:19 |
|
|
|
jhk2005
Yearling
United Kingdom
166 Posts |
Posted - 21/07/2011 : 11:31:06
|
| I have mine on mats, with the stat secured in one RUB through a hole in the side and taped in place, then a temp-gun to keep a check on them. You can use pp stats althugh I prefer dimming stats admittedly ; It lets me heat up to 6 rubs at once and know they'll all be fine :) |
1.6.0 Normal Royals - Will, Grace, Lolly, Patty, Maddie, Mystique, Victoria
1.1.0 Pastel Royals - Becks, Sophie
0.1.0 Spider Royal - Charlotte
0.1.0 Mojave Royal - Mo
1.1.0 Yellowbelly Royals - Pinky, Perky
1.0.0 Pinstripe Royal - Pip
1.0.0 Bumblebee Royal - Buzz
1.0.0 Vanilla Royal - Vinnie
1.0.0 Lesser Royal - Leo
1.0.0 Cinnamon Royal - Sam
1.0.0 Burmese Python - Kane
0.1.0 Albino Burmese Python - Amber
1.0.0 Redfoot Tortoise - Chucky |
|
|
|
Jacko23
Snake Mite
United Kingdom
27 Posts |
Posted - 21/07/2011 : 12:39:27
|
Where do you guys get your stats from? I've got a 18L rub and trying to keep it up to temp is driving me mad!
I checked the other day and the warm end was hanging about the 24c ( which would more than likely explain why he isn't eating!)
So I chucked a hot water bottle and a towel over the top which brought temps back up but I just can't seem to keep it
Constant! |
|
|
|
n/a
deleted
7384 Posts |
Posted - 21/07/2011 : 14:06:23
|
Blue Lizard has the biggest range of stats imo - Surrey Pet Supplies and Swellreptiles are good too - a good idea to compare prices and delivery costs - all have good online sites.
Yes, as Jhk says, or some people place the stat probe beneath the rub and on the mat. If you have a mat and stat already, how warm is the room where the rub's kept? This summer weather (ha ha) can be pretty chilly at times, especially at night.
Hope you get sorted out soon. |
|
|
|
|
anatess
Sub Adult
USA
669 Posts |
Posted - 21/07/2011 : 17:36:12
|
Hey Bats...
I hit a problem. I put the 17L RUB inside the 64L RUB but now I can't get the hot-side inside the 17L to go above 85F (29.4C) because I only have 1 stat that all the RUBs share. I got 4 RUBs right now so if I raise the stat temp, all the rest is going to get too hot. Waaaa!
I'm not sure I should risk not statting the RUB even if I elevate the RUB a bit farther from the heat tape (I have the heat tape stuck to the shelf). What do you think?
|
Snake owner since Oct 2008, so yeah, I'm no expert.
0.1.0 pastel royal
1.0.0 spider royal
0.1.0 albino royal
1.0.0 bumblebee royal
1.0.0 yellowbelly royal
0.0.1 wild-type royal
1.0.0 normal western hognose |
|
|
|
Jacko23
Snake Mite
United Kingdom
27 Posts |
Posted - 21/07/2011 : 18:59:10
|
Where do you guys get your stats from? I've got a 18L rub and trying to keep it up to temp is driving me mad!
I checked the other day and the warm end was hanging about the 24c ( which would more than likely explain why he isn't eating!)
So I chucked a hot water bottle and a towel over the top which brought temps back up but I just can't seem to keep it
Constant! |
|
|
|
n/a
deleted
7384 Posts |
Posted - 21/07/2011 : 19:03:32
|
quote:
Originally posted by anatess
Hey Bats...
I hit a problem. I put the 17L RUB inside the 64L RUB but now I can't get the hot-side inside the 17L to go above 85F (29.4C) because I only have 1 stat that all the RUBs share. I got 4 RUBs right now so if I raise the stat temp, all the rest is going to get too hot. Waaaa!
I'm not sure I should risk not statting the RUB even if I elevate the RUB a bit farther from the heat tape (I have the heat tape stuck to the shelf). What do you think?
Oh wow - I see your problem, but honestly I'm just not that knowledgeable about rubs and tape and stuff. My little corn's rub is just sitting on the heatmat in her viv (which has its own stat of course.)
But someone should be along soon who'll know. Failing that, is there any way you could rig up a separate mat and stat? Good luck! |
|
|
|
|
n/a
deleted
7384 Posts |
Posted - 21/07/2011 : 19:05:45
|
quote:
Originally posted by Jacko23
Where do you guys get your stats from? I've got a 18L rub and trying to keep it up to temp is driving me mad!
I checked the other day and the warm end was hanging about the 24c ( which would more than likely explain why he isn't eating!)
So I chucked a hot water bottle and a towel over the top which brought temps back up but I just can't seem to keep it
Constant!
Hi, Jacko, I don't know if this got duplicated by accident but I replied above, though I'm not an expert on rubs, but hopefully someone with more experience should be along soon - do hope you get the temps sorted. |
|
|
|
|
jhk2005
Yearling
United Kingdom
166 Posts |
Posted - 21/07/2011 : 23:49:00
|
Hi Jacko, I got mine from my mates reptile shop - they're all "Habistat Dimming Thermostat", usually about cost me £40 each but well worth the investment.
My cams knackered so I can't put up pics but if you can imagine a larger than normal air-hole in one of the narrow sides for the probe to go through, I then sellotape it (about a 3rd of the length of the rub), that way the probe sits directly above a 3ft/4ft mat. I usually have my stats set at approx 88-92F (abut 30C) and adjust it as necessary. If you're using a smaller mat you basically need to adjust how far in the probe sits but the ideas the same. The reason I put it inside is that I find its more accurate when monitoring and maintaining the temp inside the rub to correspond with the temp set on the stat.
If you're not sure where to buy from, google "Habistat Dimming Thermostat" and it should give you plenty of places to buy one from.
Hope this makes things easier matey |
1.6.0 Normal Royals - Will, Grace, Lolly, Patty, Maddie, Mystique, Victoria
1.1.0 Pastel Royals - Becks, Sophie
0.1.0 Spider Royal - Charlotte
0.1.0 Mojave Royal - Mo
1.1.0 Yellowbelly Royals - Pinky, Perky
1.0.0 Pinstripe Royal - Pip
1.0.0 Bumblebee Royal - Buzz
1.0.0 Vanilla Royal - Vinnie
1.0.0 Lesser Royal - Leo
1.0.0 Cinnamon Royal - Sam
1.0.0 Burmese Python - Kane
0.1.0 Albino Burmese Python - Amber
1.0.0 Redfoot Tortoise - Chucky |
|
|
| |
Topic |
|
Heating a RUB
