| Author |
 Topic  |
|
|
Kazerella
Royal Python Admin
United Kingdom
1196 Posts |
 Posted - 21/02/2009 : 17:38:32
|
As some guys wanted to see this, and i dunno wot happened to last ones pictures and it wouldnt let me edit it i thought i would repost these.
B&Q cut them all to size for me from one piece of 200cm X 60cm board. (nice people)
it starts to take shape
almost done
add edgeing tape, vent, glass, small light and heat mat.
sorted!
A 24x15x15 wooden viv built for under £30 (not including mat)
As it is now. (light is a normal one now not a flourescent tube)
just wanted to show you guys that you dont always have to spend alot to have a good set up.
Here are the plans if anyone wants to have a go. all cut from one piece of board.
 |
 
|
|
|
snewchybewchy
Snake Mite
United Kingdom
8 Posts |
Posted - 12/07/2011 : 18:20:21
|
| where did you buy your glass from ? how much did the wood cost you ? |
 |
|
|
n/a
deleted
7384 Posts |
Posted - 12/07/2011 : 18:38:45
|
Daz's post is very good, but the flatpack vivs are so cheap these days - you can buy a 2' viv from Surrey pet supplies for £28, delivery £5, complete with glass, everything, and very easy to put together.
ps any probs ask me - I've done 7 of these critters now and if I can do it - anyone can lol. |
|
Edited by - n/a on 12/07/2011 18:41:23 |
|
|
|
Tawfik47
Fully Grown Royal
Czech Republic
1584 Posts |
Posted - 14/09/2011 : 11:15:21
|
| Does high humidity affect the wood? |
1.0.0 Common Boa - Revo CB13
I had a royal python (Blitz) for two years for those who are wondering what I'm doing here with my boa :D |
|
|
|
markmifsud
Sub Adult
United Kingdom
534 Posts |
Posted - 14/09/2011 : 14:13:41
|
| as long as you use pet safe silicon to seal all of the edges and raw faces it shouldnt be a problem |
1.1.0 Pastal Ball
1.0.0 Normal Ball aged 7(ish)
0.1.0 Normal Ball aged 7(ish)
Bromley. SE London |
|
|
|
prmdc098
Snake Mite
United Kingdom
9 Posts |
Posted - 02/02/2012 : 23:28:38
|
| looks really good night give this a go, How do you get the glass in and were did you get it from |
|
|
|
ShadEO9
Yearling
United Kingdom
126 Posts |
Posted - 27/04/2013 : 00:35:48
|
Thanks for sharing,
I'm going to follow these steps next pay day...
Don't suppose you have the measurements for the glass etc?
Also where do you buy the glass runners? and glass for that fact?
Cheers in advance! |
 |
|
|
|
richard v
Sub Adult
United Kingdom
563 Posts |
Posted - 02/05/2013 : 21:43:02
|
| You may be waiting a while for a response on this, this was posted nearly 4 years ago. Once you build the viv and put the runners in which you can buy on ebay reptile shops. Just take a measurement then go to a glazier they should be able to cut it to size, failing that if your building this viv it's small enough to take it with you and get them to measure it for you. |
|
|
| |
Topic |
|
How to build a vivarium by DazB
