| T O P I C R E V I E W |
| Foremand |
Posted - 02/02/2013 : 15:58:04
£6 for a large sheet of 0.9cm squared mesh. Could make two out of it but I messed up the first one lol.
Here it is.
I did manage to make my vent of 100mm x 1200mm for when I rebuild my boas 4 foot tank. As back board is loose. |
| 9 L A T E S T R E P L I E S (Newest First) |
| Foremand |
Posted - 14/02/2013 : 20:25:37
I've not had any problems with mine. Mine doesn't seem to get hot and I'm running a 150w ceramic heat bulb. As I've got a 4 foot viv |
| phlegmatical |
Posted - 14/02/2013 : 19:10:32
do these guards get hot at all? i was thinking of making one but was worried they might do as they dont have the protective coating? |
| rockroyal |
Posted - 03/02/2013 : 15:39:10
glad i could help |
| reptiledanny |
Posted - 03/02/2013 : 14:46:30
iv done quite a few of these myself, have pics of how i made it from my last one, but forgot to post them. |
| kev 5 |
Posted - 03/02/2013 : 13:44:41
looks good |
| Foremand |
Posted - 03/02/2013 : 13:38:08
Great idea I may have a play around :) |
| rockroyal |
Posted - 03/02/2013 : 05:57:19
great job there.
my wife uses small pinch rings in her jewallry making these could be used as hindges ! then its just a case of getting a small looped spring ( hobby craft ) to secure the door into place. |
| Foremand |
Posted - 02/02/2013 : 21:18:36
I did manage to make two out of it. Instead of making a net. I cut all the sides separately. So I did and still had load left over. But not enough for a third lol
And the bottom opening would be good but being held in by 2 screws. Isn't a massive issue lol |
| herriotfan |
Posted - 02/02/2013 : 21:14:33
If you can get two out of it for £6.00 that's cheap! Next step is to get the bottom to open for easier bulb changing.....  |
