The Royal Python Forum
The Royal Python Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Royal Python Posts
 Royal Python - General Keeping information
 Steamy Viv

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
   

T O P I C    R E V I E W
curiouslyfacinated Posted - 22/08/2012 : 17:09:35
I have just set up and moved Loki from his fawn to a 3' viv. The glass on the front has gradually got more and more steamed up until i can not see in at all. I am wondering if this is normal and will clear as the substrate dries out a bit?? I have changed to Forest Floor which is much wetter than the aspen i have used until now.

xx
8   L A T E S T    R E P L I E S    (Newest First)
curiouslyfacinated Posted - 26/08/2012 : 12:29:51
Thanks for all the comments and advice. it all seems to have settled down now and Loki is enjoying exploring his new home.

xx
Lotabob Posted - 24/08/2012 : 12:35:12
Humidity is high. Too high? Not so much. The humidity where they come from is really high most of the time. Humidity on its own is not a huge cause for concern, with good air flow and a clean environment humidity is not a problem for Royals. The problem with damp substrate you have to watch out for is scale rot, which again is not caused by the wet substrate itself but the bacteria/fungi/mould that multiplies in it quickly. Its also these rapidly increasing microbes that lead to RI. You can have a really high humidity setup but it needs cleaned out weekly, the drier it is the slower the microbes multiply so you dont need to clean quite so much.
curiouslyfacinated Posted - 24/08/2012 : 08:29:37
I have been leaving the doors open a tiny crack to allow the moisture to escape and it seems to be clear. He can't be too unhappy in the new home as he ate yesterday just one day after moving in! :)
LittlestarRed Posted - 23/08/2012 : 09:33:17
Don't worry too much. Increased humidity for short periods shouldn't hurt. I think it's just the substrate being damp, once it dries out a bit then the glass should stop misting up.
Snecklifter Posted - 23/08/2012 : 08:50:56
If the vivarium is steaming up, the humidity is too high. Simples.

Some people 'bake' the substrate in the oven before thay put it in the vivarium. I think it depends on the substrate you're using. I use beech chips and you don't have to bother with all that malarky.
coxcats Posted - 22/08/2012 : 18:46:03
I find that when I do a complete clean out my vivs steam up for a while. I use bark but it gradually clears.
Danno91 Posted - 22/08/2012 : 17:39:10
I'm currently having a similar issue with a rub and I in my case its due to not enough ventilation, in your case I would say you are correct its probable the substrate, can i ask where the water bowl is in relation to the heat source as if its to close it could raise humidity, are your temps correct ?
carlb1981 Posted - 22/08/2012 : 17:13:26
I think when you use stuff like that your supposed to bake it to dry it out too much humidity is bad for royals and can cause respiratory infection

The Royal Python Forum © THEROYALPYTHON.co.uk Go To Top Of Page
Snitz Forums 2000