T O P I C R E V I E W |
hiper2009 |
Posted - 18/12/2010 : 10:50:16 Hi whats the best temps to set for a royal on a matt ? |
16 L A T E S T R E P L I E S (Newest First) |
hiper2009 |
Posted - 19/12/2010 : 22:18:45 quote: Originally posted by Royalbob
quote: Originally posted by reptiledanny
that is a bit too cold for a royal to be at for a couple of days, yes, like bob sed, a few hours maybe but for a few days it would not be good for them. can u not get ur pet shop to hold them for you until the stat comes??
yep get your set up sorted before you buy your snakes. Where do you live, you can buy a fuse anywhere.
I'm from Leicester - Eastmidlands , I have been meaning to go B&Q to get a fuse but just not had time off work.. |
Royalbob |
Posted - 19/12/2010 : 17:18:06 quote: Originally posted by reptiledanny
that is a bit too cold for a royal to be at for a couple of days, yes, like bob sed, a few hours maybe but for a few days it would not be good for them. can u not get ur pet shop to hold them for you until the stat comes??
yep get your set up sorted before you buy your snakes. Where do you live, you can buy a fuse anywhere. |
hiper2009 |
Posted - 19/12/2010 : 15:20:27 I have got a dimmer it just needs the fuse changing i will change that first then get the pastels ordered in. |
reptiledanny |
Posted - 19/12/2010 : 14:21:41 that is a bit too cold for a royal to be at for a couple of days, yes, like bob sed, a few hours maybe but for a few days it would not be good for them. can u not get ur pet shop to hold them for you until the stat comes?? |
Royalbob |
Posted - 19/12/2010 : 13:18:17 Would personally only do this for a few hrs. Thats too cold to keep them permanent. |
hiper2009 |
Posted - 18/12/2010 : 22:35:22 quote: Originally posted by Royalbob
ideal temps 80-90F from cold to hot end plus minus a couple degrees is ok
Ok the reason i ask this is i am going to have to hook the heatmatt up with the two boa's thermostat which is set on 27-29C just until i get my microclimate dimmer sorted.. |
Royalbob |
Posted - 18/12/2010 : 22:12:49 ideal temps 80-90F from cold to hot end plus minus a couple degrees is ok |
hiper2009 |
Posted - 18/12/2010 : 21:34:52 quote: Originally posted by Royalbob
I wouldn't go above 31-32c max just try to keep it quite constant as it would be in the wild.
Ok and what if the temps went 27-29C at some point would it mind ? |
Royalbob |
Posted - 18/12/2010 : 20:36:01 I wouldn't go above 31-32c max just try to keep it quite constant as it would be in the wild. |
hiper2009 |
Posted - 18/12/2010 : 20:15:00 Thanks RoyalBob yes i know how to do this , and will my royal mind if it hits lets say 35C will it go mardy ? |
Royalbob |
Posted - 18/12/2010 : 20:04:20 quote: Oh thanks for that Danny but how do i messure the air temp ?
quote: Originally posted by reptiledanny
you dont really, just measure the ground temps with your digi therm as you would
Air temp is just as important as ground floor temp especially in a rub.
For ground floor temp place rub directly on the mat and then place temp probe inside the rub above the mat to get your hot spot temp. Set your thermostat accordingly.
Air temp in a rub will only be a few degrees above the ambient room temp which is the reason snake rooms with rack are heated to provide the ambient temp. Average room temp is only 68-70F which is too cold for a ball python. place temp probe anywhere on cold side of the rub and temp should read 80F during the day allowing for a few degrees drop at night. |
reptiledanny |
Posted - 18/12/2010 : 17:35:27 you dont really, just measure the ground temps with your digi therm as you would |
hiper2009 |
Posted - 18/12/2010 : 16:59:42 Oh thanks for that Danny but how do i messure the air temp ? |
reptiledanny |
Posted - 18/12/2010 : 16:05:09 basically, set the floor temps to 32 degrees, and then see what the air temps are, they are not as bad, its the floor temps you want to be 32 degrees, mine range from 30-34 with 32.5 the temp that the mat stat turns off |
hiper2009 |
Posted - 18/12/2010 : 13:47:50 quote: Originally posted by Royalbob
This gives you all your info http://www.theroyalpython.co.uk/royal_python_care_sheet.htm
I presume your using a r.u,b with a mat outside but either way your Royal needs an ambient air temperature of 27-29C (80-85F) throughout with a hot spot of 32.5C (90F) during the day. At night, the ambient air temperature can drop down a few degrees but no lower than 75F with a basking area of 85-90F.
I keep all my temps running constant day and night and naturally the enclose will drop a few degrees at night.
How do i keep a hotspot of 32.5 in a RUB on a heatmat of 27-29C ? |
Royalbob |
Posted - 18/12/2010 : 12:27:02 This gives you all your info http://www.theroyalpython.co.uk/royal_python_care_sheet.htm
I presume your using a r.u,b with a mat outside but either way your Royal needs an ambient air temperature of 27-29C (80-85F) throughout with a hot spot of 32.5C (90F) during the day. At night, the ambient air temperature can drop down a few degrees but no lower than 75F with a basking area of 85-90F.
I keep all my temps running constant day and night and naturally the enclose will drop a few degrees at night. |