| Author |
 Topic  |
|
|
Tiggy
Hatchling
United Kingdom
79 Posts |
 Posted - 28/07/2012 : 01:48:22
|
Me again!!! Curious query really. Got my Pulse stat 600w which states that it can be used to control two heaters????? Only one probe,so how does this work out? |
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 28/07/2012 : 05:44:27
|
you can set up a single stat to run 2 heat source's as long as the wattage of both bulbs is not higher than 600w although if i did this i would probarbly only use 2x 250w bulbs so the stat is not maxed out trying to run them.
you set one viv up with the probe as usuall but get an adaptor,small extesion lead or get an electrition to wire a double plug to the stat so both bulbs can be plugged in.
then you need to adjust the stat so the temps are reading right on digital thermometers with running 2 bulbs you will need to set the one with the probe a little cooler as the one without the probe is likley to run a little hotter
hopefully that makes sense |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks
incubate 2 campaign
https://www.facebook.com/incubate2 |
 |
|
|
Unamed
Yearling
United Kingdom
147 Posts |
Posted - 28/07/2012 : 09:31:51
|
| This is quite easy as long as both bulbs are same wattage and enclosures are roughly the same size. Just make sure uve got a thermometer in each and monitor it |
0.0.1 Python Regius |
|
|
|
reptiledanny
Old Royal - I Post too much!
United Kingdom
2106 Posts |
Posted - 28/07/2012 : 10:21:24
|
| personally i would never use 1 thermostat to control 2 bulbs. too many things could go wrong because the probe has to be in the cage under the bulb. if royal moves probe, both bulbs heat up. if bulb with probe under blows, other bulb will carry on heating until it reaches its max. just my opinion |
1.2 royal pythons 0.1 hog island boa 1.0 corn snake
sig made by stapey |
|
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 28/07/2012 : 14:56:41
|
quote:
Originally posted by chrisc
with running 2 bulbs you will need to set the one with the probe a little cooler as the one without the probe is likley to run a little hotter
They will run more or less exactly the same (slight variation in the heat kicked out by even the same branded bulbs) unless one is on top of the other with insufficient air flow between them or they are different sizes.
I am also in camp, '1 stat 1 bulb' though. It only takes the bulb with the stat probe to blow (bulbs blow, its what they do) and go cold to absolutely cook the other vivarium. I think the more than one heat source thing is more towards heat mats that are far less likely to blow but even then I wouldn't do it, stats are safety nets for faulty heat sources, and in my book each heat source needs to have its own safety net. |
 |
|
|
|
boomslang
Old Royal - I Post too much!
United Kingdom
2025 Posts |
Posted - 28/07/2012 : 16:21:55
|
quote:
I am also in camp, '1 stat 1 bulb' though. It only takes the bulb with the stat probe to blow (bulbs blow, its what they do) and go cold to absolutely cook the other vivarium. I think the more than one heat source thing is more towards heat mats that are far less likely to blow but even then I wouldn't do it, stats are safety nets for faulty heat sources, and in my book each heat source needs to have its own safety net.
Very good point,Sure you can buy super stats if you have like 20 racks to control. |
1.0.0 pinstripe Royal Python
1.0.0 Bumblebee Royal Python
1.0.0 Normal corn
1.0.0 Extreme red Hognose
0.1.0 Extreme red tiger Hognose
1.1.0 yemen chameleons
1.0.0 Piebald yemen
1.0.0 Tamatave panther
1.0.0 Quadricornis
 |
|
|
|
reptilemadd
Sub Adult
United Kingdom
969 Posts |
Posted - 28/07/2012 : 21:42:42
|
| Small point unless you are referring to a ceramic heater as "the bulb" you shouldn't really be using a PP Stat with normal bulbs unless you like the light house effect as the bulb will be constantly flashing when it gets up to temp lol, but on the other point about controlling more than one heat source with the same stat I'm of the belief that it's fine as long as you have the type of digital thermometer that has an alarm on if the cage it's in gets either to hot or to cold, that way you will always know if there is a problem with whatever your using to heat your cage.... |
1.0.0 beardie "magic"
1.1.0 100% Het Clown "Cerberus" and "Artemis"
0.1.0 Poss Calico "Ariadne"
1.0.0 Lesser " Kronos"
  |
|
|
|
Lotabob
Royal Python Moderator
United Kingdom
5008 Posts |
Posted - 28/07/2012 : 23:55:45
|
Need to be a very loud alarm if I'm at work  Good point about bulb been referring to ceramics. |
|
|
|
|
Tiggy
Hatchling
United Kingdom
79 Posts |
Posted - 29/07/2012 : 03:54:49
|
 Cheers guys. All makes a lot of sense now. |
|
|
| |
Topic |
|
Pulse stats
