Author |
Topic |
|
donjolly8947
Hatchling
United Kingdom
88 Posts |
Posted - 04/11/2012 : 18:49:20
|
how can i get my cold side to stay around 26 it keeps dropping |
|
jbarlow91
Sub Adult
United Kingdom
897 Posts |
Posted - 04/11/2012 : 19:02:01
|
Its probably just cause of the cold weather so should be ok as long as it aint droping by loads the snake will thermoregulate so if he is too cold he will go to warm end anyway |
0.1.0 snow corn Ruby 1.0.0 ghost corn-Oreo 1.0.0 bearded dragon- kato 0.1.0 bearded dragon- keita 1.0.0 cali king-Taz 0.1.0 royal-Clio 1.0.0 yellowbelly royal- Moose 0.1.0 hognose jinxx |
|
|
donjolly8947
Hatchling
United Kingdom
88 Posts |
Posted - 04/11/2012 : 19:05:57
|
ok sometimes it gets down to 23 or 22.5 |
|
|
jbarlow91
Sub Adult
United Kingdom
897 Posts |
Posted - 04/11/2012 : 19:11:23
|
Shouldn't matter too much then only other thing could do is keep the room the tank is in warmer if you get too worried |
0.1.0 snow corn Ruby 1.0.0 ghost corn-Oreo 1.0.0 bearded dragon- kato 0.1.0 bearded dragon- keita 1.0.0 cali king-Taz 0.1.0 royal-Clio 1.0.0 yellowbelly royal- Moose 0.1.0 hognose jinxx |
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 04/11/2012 : 19:24:36
|
i dont measure the cold end temps in my vivs as long as the hot end is the right temp then it doesnt matter too much what the cool end is |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
Lindstrom
Hatchling
United Kingdom
91 Posts |
Posted - 04/11/2012 : 20:34:18
|
I agree with chrisc but if you really want to control it and you use a ceramic then move the sensor further away but be warned this will also increase the hot end, to counter move the heat source until you get the desired temps. |
|
|
donjolly8947
Hatchling
United Kingdom
88 Posts |
Posted - 04/11/2012 : 21:28:46
|
i will just leave my sensor under my ceramic but thanks for all your help i think as longs as my hot end is ok i will be fine i hope |
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 04/11/2012 : 21:51:32
|
will be fine as long as the temp drops by a minimum 3-5c in to cool end more is fine as the snake can move to the hot end when it wants.
only viv i have a slight problem with is a vivexotic thats 3ftx15"x16" not sure of the model, i keep the hot end at 30c ish for one of the boas as theres only a 1-1.5c drop in the cool end due to the size of the viv so shes kept a little cooler to reduce any chance of her being to hot |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
Lindstrom
Hatchling
United Kingdom
91 Posts |
Posted - 05/11/2012 : 07:57:09
|
The sensor should be in the middle hanging down ideally then use a thermometer on the hot and cold ends, if you have the sensor under then the whole tank will get be under the threshold before the thermostat kicks back in again. |
|
|
chrisc
Old Royal - I Post too much!
United Kingdom
3326 Posts |
Posted - 05/11/2012 : 08:25:27
|
personally i have all my stat probes fitted to the back wall inline with the heat source can just see the stat probe under the bit of wood
but it doesnt matter too much as long as theres a digital thermometer as you said |
1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake
my youtube. http://www.youtube.com/user/pegrocks incubate 2 campaign https://www.facebook.com/incubate2 |
|
|
|
Topic |
|