The Royal Python Forum
The Royal Python Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Royal Python Posts
 Royal Python - General Keeping information
 Temps in my RUB lol		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

reptilemadd
Sub Adult

United Kingdom
969 Posts
Posted - 17/03/2012 :  19:24:33  Show Profile  Reply with Quote
Hi guys just a quickie I recently moved one of my snakes into a 50ltr rub and have been fighting with the temps ever since, inside his cold hid the thermometer reads 22-23, the ambient temp seems to be about 28, but when I place the thermometer probe in his hot hide it read 38 so I'm at a loss as to what to do since his cold hide and ambient temps are almost spot on, any ideas would be gratefully received
1.0.0 beardie "magic"
1.1.0 100% Het Clown "Cerberus" and "Artemis"
0.1.0 Poss Calico "Ariadne"
1.0.0 Lesser " Kronos"
Edited by - reptilemadd on 17/03/2012 19:24:51

Lotabob
Royal Python Moderator

United Kingdom
5008 Posts
Posted - 17/03/2012 :  19:28:51  Show Profile  Reply with Quote
I'm at a loss as to how you're getting an ambient temp of 28 in a rub. lol.

I put the thermometer probe and stat probe glued to the bottom of the RUB in the hot side and set that to 32oC. Everything else is dependant on the heat in the room. As long as the bottom of the RUB is 32oC though then the snakey always has somewhere to go to warm up even if they have to shuffle some substrate out the way.

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
The Royal Python Forum © THEROYALPYTHON.co.uk Go To Top Of Page
Snitz Forums 2000